What are the characteristics of granite crusher?
Granite crusher is a self-developed crushing technology with high output and high efficiency. It is a large-scale crushing equipment specially designed and developed for granite. It has a high degree of automation, low operating cost, high crushing rate, energy saving, large output, less pollution and simple maintenance. And other advantages, it is a kind of equipment suitable for crushing granite.
The structure and crushing principle of granite crusher
The main working part of a granite crusher is a high-speed rotating rotor with a plate hammer. During the back-and-forth impact, the pieces of material also collide with each other. As the material is impacted by the blow bar, the impact plate and the collision between them, the internal cracks are continuously generated, loosened and finally broken; the impact device is used to withstand the material hit by the blow bar and bounce it off, and the main component is the impact plate , welded with steel plates, and wear-resistant linings are provided on the counterattack surface.
Second, the main characteristics of granite crusher
Using high chromium plate hammer and alloy, it has the advantages of anti-impact, anti-wear and strong impact force.
With automatic control system, it can effectively ensure the continuity and uniformity of particle size.
The rotor adopts heavy-duty design, which effectively increases the reliability, improves the rotational inertia of the rotor, and then improves the processing capacity of the crusher.
The whole system consists of motor, fuselage, bearing, rotor and so on. Equipped with professional hydraulic system, easy maintenance.
Through the jacking device, the frame can be opened quickly, and the machine can be replaced and repaired.
The granite crusher has a large feeding port and a large crushing cavity. It is suitable for materials with high hardness, large particle size and less stone powder.
Matters needing attention when granite crusher is working
Before starting, carefully check whether all the fasteners are completely firm, whether the bearing is well lubricated, whether there is enough grease at the connection of the shaft plate in the bearing, whether there is ore or other debris in the crushing cavity, and whether the protection device is in good condition. If the protective device is found to be unsafe, it should be inspected and repaired immediately.
When starting, make sure to start with no load. After that, test the machine with no load to check whether the machine and transmission parts are normal. If there is any abnormality, immediately stop the inspection.
After confirming the normal operation of the crusher, the feeding can be started. It is necessary to ensure positive uniform feeding and sudden load changes. If there is any abnormal phenomenon, the feeding should be stopped first, and the machine should be stopped after the material at the broken wrist is completely discharged.
The above introduces the working environment, working characteristics and operation precautions of the granite crusher. This equipment can effectively process granite materials and provide the market with high-quality granite sand and stone aggregates.
